View TC74VHC139F08_4859507.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TC74VHC139F/FN/FT/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHC139F,TC74VHC139FN,TC74VHC139FT,TC74VHC139FK
Dual 2-to-4 Line Decoder
The TC74VHC139 is an advanced high speed CMOS 2 to 4 LINE DECODER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The active low enable input can be used for gating or it can be used as a data input for demultiplexing applications. When the enable input is held High, all four outputs are fixed at a high logic level independent of the other inputs. An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.
Note: xxxFN (JEDEC SOP) is not available in Japan. TC74VHC139F
TC74VHC139FN
Features
* * * * * * * High speed: tpd = 5.0 ns (typ.) at VCC = 5 V Low power dissipation: ICC = 4 A (max) at Ta = 25C High noise immunity: VNIH = VNIL = 28% VCC (min) Power down protection is provided on all inputs. Balanced propagation delays: tpLH tpHL Wide operating voltage range: VCC (opr) = 2 V to 5.5 V Pin and function compatible with 74ALS139
TC74VHC139FT
Pin Assignment
TC74VHC139FK
1G
1 2 3 4 5 6 7 8 (top view)
16 15 14 13 12 11 10 9
VCC
1A 1B
2G
2A 2B
2Y0 2Y1 2Y 2 2Y3
1Y0
1Y1
1Y 2
1Y3
GND
Weight SOP16-P-300-1.27A SOL16-P-150-1.27 TSSOP16-P-0044-0.65A VSSOP16-P-0030-0.50
: 0.18 g (typ.) : 0.13 g (typ.) : 0.06 g (typ.) : 0.02 g (typ.)
1
2008-05-01
TC74VHC139F/FN/FT/FK
IEC Logic Symbol
(2) (3) (1) (14) (13) (15) X/Y 0 1 2 3 (4) (5) (6) (7) (12) (11) (10) (9) 1Y0 1Y1 1Y 2 1Y3 2Y0 2Y1 2Y 2 2Y3
(2) (3) (1) (14) (13) (15)
1A 1B 1G 2A 2B 2G
1 2 EN
1A 1B 1G 2A 2B 2G
DMUX 0 0 1G 3
0 1 2 3
(4) (5) (6) (7) (12) (11) (10) (9)
1Y0
1Y1 1Y 2 1Y3 2Y0 2Y1 2Y 2 2Y3
Truth Table
Inputs Enable
G
Outputs Select B X L L H H A X L H L H Y0 H L H H H Y1 H H L H H Y2 H H H L H Y3 H H H H L Selected Output None Y0 Y1
H L L L L
Y2
Y3
X: Don't care
System Diagram
4/12
Y0
A
2/14
5/11 Y1 6/10
Y2
B
3/13
G
1/15
7/9
Y3
Absolute Maximum Ratings (Note)
Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating
-0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -20 20 25 75
Unit V V V mA mA mA mA mW C
180
-65 to 150
Note:
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
2
2008-05-01
TC74VHC139F/FN/FT/FK
Operating Ranges (Note)
Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr dt/dv Rating 2.0 to 5.5 0 to 5.5 0 to VCC
-40 to 85
Unit V V V C ns/V
0 to 100 (VCC = 3.3 0.3 V) 0 to 20 (VCC = 5 0.5 V)
Note:
The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.
Electrical Characteristics
DC Characteristics
Ta = 25C Characteristics Symbol Test Condition VCC (V) 2.0 High-level input voltage VIH
Ta = -40 to 85C Max

Min 1.50 VCC x 0.7

Typ.

Min 1.50 VCC x 0.7 1.9 2.9 4.4 2.48 3.80

Max

Unit
3.0 to 5.5 2.0
V
0.50 VCC x 0.3

0.50 VCC x 0.3

Low-level input voltage
VIL
3.0 to 5.5 2.0 IOH = -50 A 3.0 4.5 IOH = -4 mA IOH = -8 mA IOL = 50 A 3.0 4.5 2.0 3.0 4.5 IOL = 4 mA IOL = 8 mA 3.0 4.5 0 to 5.5 5.5
V
1.9 2.9 4.4 2.58 3.94

2.0 3.0 4.5

High-level output voltage
VOH
VIN = VIH or VIL
V
0.0 0.0 0.0

0.1 0.1 0.1 0.36 0.36
0.1
0.1 0.1 0.1 0.44 0.44
1.0 A A
Low-level output voltage
VOL
VIN = VIH or VIL
V

Input leakage current Quiescent supply current
IIN ICC
VIN = 5.5 V or GND VIN = VCC or GND
4.0
40.0
3
2008-05-01
TC74VHC139F/FN/FT/FK
AC Characteristics (input: tr = tf = 3 ns)
Characteristics Symbol Test Condition VCC (V) 3.3 0.3
Ta = 25C CL (pF) 15 50 15 50 15 50 15 50 Min

Ta = -40 to 85C Max 11.0 14.5 7.2 9.2 9.2 12.7 6.3 8.3 10
Typ. 7.2 9.7 5.0 6.5 6.4 8.9 4.4 5.9 4 26
Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

Max 13.0 16.5 8.5 10.5 11.0 14.5 7.5 9.5 10
Unit
Propagation delay time (A, B-Y)
tpLH tpHL
ns
5.0 0.5
Propagation delay time ( G -Y) Input capacitance Power dissipation capacitance
tpLH tpHL
3.3 0.3
ns
5.0 0.5
CIN CPD
pF pF
(Note)
Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD*VCC*fIN + ICC/2 (per decoder)
Input Equivalent Circuit
INPUT
4
2008-05-01
TC74VHC139F/FN/FT/FK
Package Dimensions
Weight: 0.18 g (typ.)
5
2008-05-01
TC74VHC139F/FN/FT/FK
Package Dimensions (Note)
Note:
This package is not available in Japan.
Weight: 0.13 g (typ.)
6
2008-05-01
TC74VHC139F/FN/FT/FK
Package Dimensions
Weight: 0.06 g (typ.)
7
2008-05-01
TC74VHC139F/FN/FT/FK
Package Dimensions
Weight: 0.02 g (typ.)
8
2008-05-01
TC74VHC139F/FN/FT/FK
RESTRICTIONS ON PRODUCT USE
* Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
9
2008-05-01

▲Up To Search▲

Price & Availability of TC74VHC139F08

	To Download TC74VHC139F08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .